Kia Rio: Transaxle Control Module (TCM) Replacement
When replacing the TCM, the vehicle equipped with immobilizer
must be performed the procedure as below.
[In the case of installing used TCM]
Then the TCM key register process is completed automatically.
[In the case of installing new TCM]– Insert the key and turn it
to the IGN ON and OFF position.
Then the TCM key register process is completed automatically.
|
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
| 2. |
Disconnect the TCM connector (A).
|
| 3. |
Remove the bracket installation bolts (A) and the nut (B).
|
Transaxle Control Module (TCM) Inspection
TCM Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis
ground using the backside of TCM harness connector as TCM side c ...
Transaxle Control Module (TCM) Installation
1.
Installation is reverse of removal.
In the case of the vehicle equipp ...
See also:
Schematic Diagram
Canister
The Canister is filled with charcoal and absorbs evaporated fuel vapor
from the fuel tank. The gathered fuel vapor in canister is drawn into the intake
manifold by the ECM/PC ...
5Door Projected Dimensions
Front side member tooling hole (Ø6.6)
Front side member tooling hole (Ø6.6)
Side cover mounting hol ...
Removal
1.
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
2.
Turn the steering wheel so that the fr ...
Copyright © www.kirmanual.com 2014-2024