Kia Rio: Transaxle Oil Temperature Sensor Removal
| 1. |
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
|
| 2. |
Remove the under cover (A).
|
| 3. |
Replace new gasket and the plug after draining the automatic transaxle
fluid by removing the drain plug. (Refer to "Hydraulic system (Fluid)"
in this group)
|
| 4. |
Remove the air breather hose (A).
|
| 5. |
Remove the valve body cover (B).
|
| 6. |
Disconnect the oil temperature sensor connector (A).
|
| 7. |
Remove the oil temperature sensor (A) after removing a bolt.
|
Transaxle Oil Temperature Sensor Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor ...
Transaxle Oil Temperature Sensor Installation
1.
Installation is the reverse of removal.
After replacement or reinstallation procedure of ...
See also:
Body Side Moulding Replacement
Roof Garnish Replacement
•
When prying with a flat-tip screwdriver, wrap it with
pro ...
Shift Lever Removal
Shift Lever Assembly Replacement
1.
Remove the center console.
(Refer to "interior (console)" in BD group)
2.
Di ...
Components
1. Battery (Non-ISG Type)
2. Battery (ISG Type)
3. Battery tray
4. Battery insulation pad
5. Battery mounting bracket
...
Copyright © www.kirmanual.com 2014-2024