Kia Rio: Transaxle Oil Temperature Sensor Installation
| 1. |
Installation is the reverse of removal.
|
After replacement or reinstallation procedure of the valve body
assembly, must perform procedures below.
|
Transaxle Oil Temperature Sensor Removal
1.
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
...
Input Speed Sensor Description
Input speed sensor (A) is a vital unit that measures the rate of rotation
of the input shaft inside the transaxle and delivers the readings to the TCM.
The sensor provides critical input data ...
See also:
Installation
•
Install the component with the specified torques.
•
...
Steering Gear box Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
General Troubleshooting Information
Before Troubleshooting
1.
Check applicable fuses in the appropriate fuse/relay box.
2.
Check the battery for damage, state of charge, and cl ...
Copyright © www.kirmanual.com 2014-2024