1. |
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
|
2. |
Remove the under cover (A).
|
3. |
Replace new gasket and the plug after draining the automatic transaxle
fluid by removing the drain plug. (Refer to "Hydraulic system (Fluid)"
in this group)
|
4. |
Remove the air breather hose (A).
|
5. |
Remove the valve body cover (B).
|
6. |
Remove the plate and the detent spring (A) after removing the
bolt.
|
7. |
Remove the bolt (3ea) after disconnecting the solenoid valve connector
(B) and the oil temperature sensor connector (A).
|
8. |
Remove the valve body assembly (A).
|
9. |
Disconnect the input & output speed sensor connector (A).
|
10. |
Remove the input & output speed sensor (B) after removing the
bolts (2ea).
|
Front Bumper Components
1 . Radiator grille upper cover
2 . Front bumper cover
3 . Front bumper side bracket [LH]
4 . Front bumper side bracket [RH]
...
Inspection
Steering Wheel Play Inspection
1.
Turn the steering wheel so that the front wheels can face straight
ahead.
2.
Measure the distance the ...
Photo Sensor (FATC only) Inspection
1.
Turn the ignition switch ON.
2.
Connect the GDS.
3.
Emit intensive light toward photo sensor using a lamp, a ...