Kia Rio: Input Speed Sensor Installation
| 1. |
Installation is the reverse of removal.
|
After replacement or reinstallation procedure of the valve body
assembly, must perform procedures below.
|
Input Speed Sensor Removal
1.
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
...
Output Speed Sensor Description
The output speed sensor (A) is a vital unit that measures the rate of
rotation of the transaxle's turbine shaft and output shaft, and delivers the
readings to the TCM. The sensor provides ...
See also:
Hazard Lamp Switch Inspection
1.
Operate the switch and check for continuity between terminals.
...
Inspection
[System Inspection]
1.
Disconnect the vapor hose from the intake manifold and connect
a vacuum pump to the nipple on the intake manifold.
· At Cold Engine [Engi ...
Circuit Diagram
(M/T)
(A/T)
...
Copyright © www.kirmanual.com 2014-2024