Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the hydraulic pressure
will need to be adjusted after replacing the VFS solenoid valve. If
replacing the VFS solenoid valve; also replace the valve body assembly.
(Refer to "Valve Body" in this group)
|
Steering Column and Shaft Inspection
1.
Check the steering column for damage and deformation.
2.
Check the steering column for damage and deformation.
3.
...
Turn Signal Lamp (Door mirror) Removal
Door Mirror Turn Signal Lamp
1.
Using a screwdriver or remover, remove the mirror (A) from th
mirror holder.
Becareful not to damage to the clip.
...
Relay Box (Engine Compartment) Inspection
Replacement of EMS box
1.
Disconnect the negative (-) battery terminal.
2.
Push hooks in the engine room relay box out to the arrow directio ...