Kia Rio: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Circuit Diagram

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications

Direct control VFS[35R/C] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current value(mA ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Inspection

1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

See also:

Rubber Parts And Tubes
Always prevent gasoline or from touching rubber parts or tubing. ...

Accelerator Pedal Installation
1. Installation is reverse of removal. Accelerator pedal module installation nut: 12.7 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb- ...

Front Stabilizer Bar Inspection
1. Check the bushing for wear and deterioration. 2. Check the front stabilizer bar for deformation. 3. Check th ...