Kia Rio: SS-A Solenoid Valve(ON/OFF) Inspection
| 1. |
Turn ignition switch OFF.
|
| 2. |
Disconnect the solenoid valve connector.
|
| 3. |
Measure resistance between sensor signal terminal and sensor ground
terminal.
|
| 4. |
Check that the resistance is within the specification.
|
SS-A Solenoid Valve(ON/OFF) Removal
1.
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
...
See also:
Specification
Item
Specification
Coil Resistance (Ω)
0.5 [20°C(68°F)
...
Exhaust Manifold: Components
1. Heat protector
2. Exhaust manifold
3. Exhaust manifold gasket
4. Exhaust manifold stay
...
Rear Wheel Speed Sensor Components
1. Rear wheel speed sensor connector
2. Rear wheel speed sensor
...
Copyright © www.kirmanual.com 2014-2024