Kia Rio: SS-A Solenoid Valve(ON/OFF) Installation
1. |
Installation is the reverse of removal.
|
•
|
When installing, apply the ATF oil or white vaseline to
the O-ring (A) not to be damaged.
|
•
|
The gasket of the valve body gasket (A) use new one.
|
•
|
Adding automatic transaxle fluid.
(Refer to "automatic transaxle system" in this group.)
|
|
1.
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
...
SS-B solenoid valve is attached to the valve body and is an on/off solenoid
valve that is used to change gears. SS-B Solenoid valve(ON/OFF) is installed
at valve body.
...
See also:
System Circuit Diagram
MDPS Circuit Diagram
Harness Connector
Connector
Pin no
Pin name
Descrption
Specifcation
TAS sensor signal 8P connector A
1
...
ESC Control Module Components
1. Front - left tube
2. Rear - right tube
3. Rear - left tube
4. Front - right tube
5. MC2
6. MC1
7. ESC control module (HECU)
8. Damper
9. Bracket
...
Specification
Temperature
Resistance (kΩ)
°C
°F
-40
-40
40.93 ~ 48.35
-20
-4
13.89 ~ 16.03
0
32
...