Kia Rio: SS-B Solenoid Valve(ON/OFF) Installation
|
1. |
Installation is the reverse of removal.
|
| •
|
When installing, apply the ATF oil or white vaseline to
the O-ring (A) not to be damaged.
|
| •
|
The gasket of the valve body gasket (A) use new one.
|
| •
|
Adding automatic transaxle fluid.
(Refer to "Hydraulic system (Fluid)" in this group)
|
|
1.
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
...
Inhibitor Switch monitors the lever's position(PRND) and is used to control
gear setting signals.
...
See also:
Description
The hydraulic system consists of oil, an oil filter, an oil pump, and
a valve body (valves and solenoid valves). The oil pump is powered by the engine.
ATF passes through the oil filter and g ...
Circuit Diagram
(M/T)
(A/T)
...
Check Fuses
A blade type fuse test taps provided to allow checking the fuse itself
without removing if from the fuse box. The fuse is good if the test lamp lights
up when one lead is connected to the tes ...
SS-B Solenoid Valve(ON/OFF) Removal
Inhibitor Switch Description