Kia Rio: Inhibitor Switch Removal
| 1. |
Place the shift lever into the "N" position.
|
| 2. |
Remove the air cleaner assembly.
|
| 3. |
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
|
| 4. |
Disconnect the inhibitor switch connector (A).
|
| 5. |
Remove the shift cable mounting nut (B).
|
| 6. |
Remove the manual control lever (B) and the washer after removing
a nut (A).
|
| 7. |
Remove the inhibitor switch (A) after removing the bolts (2ea).
|
Inhibitor Switch Installation
1.
Check that the shift lever is placed in the "N" position
2.
Install the inhibitor switch (A).
...
See also:
Auto Light Switch Inspection
Operate the auto light switch, then check for continuity between terminals
of multi-function switch connector.
...
Description of ESC
Electronic Stability Control (ESC) recognizes critical driving conditions,
such as panic reactions in dangerous situations, and stabilizes the vehicle
by wheel-individual braking and engine c ...
Component Location
1. Start Stop Button(SSB)
2. FOB key
3. Smart key unit
4. Interior antenna 1
5. Interior antenna 2
6. Trunk antenna
7. Door handle & door antenna
8. Bumper ante ...
Copyright © www.kirmanual.com 2014-2024