[Drum Type] |
1. |
Remove the rear wheel & tire.
|
2. |
Loosen the screw (A) and then remove the disc (B).
|
3. |
Remove the spring (A, B, C).
|
4. |
Remove the shoe (A).
|
5. |
Disconnect the parking brake cable (A) from lining (B).
|
6. |
Remove the clip (A).
|
7. |
Remove the wheel speed sensor (A) & brake hose (B) from the rear
axle aseembly and then loosen the cylinder bolts (C).
|
8. |
Loosen the hub mounting bolt and then remove the hub (A) from
the torsion beam.
|
9. |
Install in the reverse order of removal.
|
[Disc Type] |
1. |
Remove the rear wheel & tire.
|
2. |
Remove the clip (A) and then remove the parking brake cable (B).
|
3. |
Remove the brake caliper assembly (A) from the torsion beam axle
by loosening the bolts (B).
|
4. |
Loosen the screw and remove the disc (A).
|
5. |
Loosen the hub mounting bolt and then remove the hub (A) from
the torsion beam (B).
|
6. |
Install in the reverse order of removal.
|
Exterior overview
1. Hood
2. Headlamp
3. Fog light
4. Tires and wheels
5. Outside rearview mirror
6. Sunroof
7. Wiper blade
8. Windows
9. Door
10. Fuel filler lid
11. Rear combination lamp
12. Tailgate ( ...
Power Door Lock Switch Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the front door trim panel.
(Refer to the BD group - "Front door")
...
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed
both upstream and downstream of the Manifold Catalytic Converter. The sensor
output voltage varies in accordance ...