1. |
Remove the front wheel & tire.
|
2. |
Remove the brake hose bracket (A) and the wheel speed sensor bracket
(B) from the front strut assembly by loosening the mounting bolts.
|
3. |
Disconnect the stabilizer link (B) with the front strut assembly
(A) after loosening the nut.
|
4. |
Remove the cover (A) and loosen the strut mounting nut (B).
|
5. |
Disconnect the front strut assembly (A) with the front axle (B)
by loosening the bolt & nut.
|
6. |
Installation is the reverse of removal.
|
Rear Seat Belt Replacement
Rear Seat Belt Replacement
[5 Door]
•
When installing the belt, make sure not ...
Dynamic Damper Installation
1.
Apply soap powder on the shaft to prevent being damaged between
the shaft spline and the dynamic damper.
2.
Install the dynamic damper.
...
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...