Kia Rio: Front Strut Assembly Disassembly and Reassembly
| 1. |
Compress the coil spring with a strut spring compressor. Do not
compress the spring more than necessary.
|
| 2. |
Loosen the lock nut.
|
| 3. |
Disassemble the components of front strut assembly in sequence.
(Refer to Front strut assembly components)
|
| 4. |
Reassembly is the reverse of disassembly.
|
Front Strut Assembly Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Front Strut Assembly Inspection
1.
Check the components for damage or deformation.
2.
Compress and extend the piston rod (A) and check that there is
no abnormal resistance ...
See also:
Components
1. Guide rod bolt
2. Bleed screw
3. Caliper body
4. Caliper carrier
5. Inner pad shim
6. Brake pad
7. Pad retainer
...
Ignition Coil: Installation
1.
Install in the reverse order of removal.
Ignition coil installation bolts:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft)
...
Compressor Description
The compressor is the power unit of the A/C system.
It is located on the side of engine block and driven by a V-belt of engine.
The compressor changes the low pressure and low temperature r ...
Copyright © www.kirmanual.com 2014-2024