1. |
Remove the front wheel & tire.
|
2. |
Loosen the nut and remove the lower arm (A).
|
3. |
Remove the lower arm (C) by loosening the bolt (A) and (B).
|
4. |
Installation is the reverse of removal.
|
Inspection
1.
Immerse the thermostat in water and gradually heat the water.
2.
Check the valve opening temperature.
Valv ...
Description
The Alternator has eight built-in diodes, each rectifying AC current to
DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage ...
Intake Actuator Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad.
(Refer to BD group - "Crash Pad")
...