Kia Rio: Front Lower Arm Inspection
| 1. |
Check the bushing for wear and deterioration.
|
| 2. |
Check the lower arm for deformation.
|
| 3. |
Check the all bolts and nuts.
|
Front Lower Arm Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Front Stabilizer Link Replacement
1.
Remove the rear wheel & tire
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
See also:
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Circuit Diagram
...
Input Speed Sensor Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification:
Refer to "Signal Wave Form" section.
...
4Door Side Body
Front side member tooling hole (Ø12)
Fender apron upper member tooling hole (Ø7)
Front door upper hinge ...
Copyright © www.kirmanual.com 2014-2024