1. |
Remove the front wheel & tire.
|
2. |
Disconnect the stabilizer link (B) with the front strut assembly
(A) after loosening the nut.
|
3. |
Loosen the nut and then remove the tie-rod end (A) with the front
axle (B) by using SST(09568-34000).
|
4. |
Loosen the nut and then remove the lower arm (A).
|
5. |
Loosen the bolt (A) and then disconnect the universal joint assembly
from the pinion of the steering gear box.
|
6. |
Remove the rubber hanger (A).
|
7. |
Loosening the roll rod (A) mounting bolts and nuts.
|
8. |
Loosen the bolts & nuts and then remove the front sub frame (A).
|
9. |
Installation is the reverse of removal.
|
5Door Side Body B
Side outer panel notch
Side outer panel notch
Side outer panel notch
...
Tail Gate Replacement
Tail Gate Assembly Replacement
•
When removing and installing the tail gate, an assistant ...
Component Location (1)
1. Interior antenna 1
2. Interior antenna 2
3. Door outside handle
4. Buzzer
5. Smart key unit
6. SSB (Start Stop Button)
...