1. |
Remove the rear wheel & tire.
|
2. |
Loosen the bolt & nut and then remove the rear shock absorber
(A) from the torsion beam axle (B).
|
3. |
Remove the rear shock absorber (A) from the frame by loosening
the bolt.
|
4. |
Installation is the reverse of removal.
|
Installation
1.
Installation is the reverse of removal.
Use a new washer (A) whenever ...
Specifications
Battery [Non-ISG type]
Item
Specification
Model type
CMF45L-BCI
Capacity [20HR/5HR] (AH)
45/36
Cold Cranking Amperage (A)
...
Operation and Leakage Check
Check all of the following items:
Component
Procedure
Brake Booster (A)
Check brake operation by applying the brakes during a test drive.
If the brak ...