1. |
Remove the rear wheel & tire.
(Both RH side and LH side)
|
2. |
Remove the rear shock absorber (A) from the frame by loosening
the bolt.
(Both RH side and LH side)
|
3. |
Remove the coil spring.
|
4. |
Installation is the reverse of removal.
|
Muffler: Removal and Installation
1.
Disconnect the battery negative terminal.
Tightening torque
Without battery sensor :
7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ ...
Interior Trim Replacement
Door Scuff Trim Replacement
•
Put on gloves to protect your hands.
...
Output Speed Sensor Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification:
Refer to "Signal Wave Form" section.
...