1. |
Remove the rear wheel & tire.
|
2. |
Remove the clip (A) and then remove the parking brake cable (B).
|
3. |
Remove the wheel speed sensor (A).
|
4. |
Remove the parking brake cable & wheel speed sensor cable bracket
(A).
|
5. |
Remove the brake caliper assembly (B) from the torsion beam axle
by loosening the bolts (A).
|
6. |
Loosen the bolt & nut and then remove the rear shock absorber
(A) from the torsion beam axle (B).
|
7. |
Loosen the screw (A) and then remove the disc (B).
|
8. |
Loosen the hub mounting bolt and then remove the hub (A) from
the torsion beam (B).
|
9. |
Loosen the bolt and then remove the torsion beam axle (A) from
the body.
|
10. |
Installation is the reverse of removal.
|
1. |
Remove the rear wheel & tire.
|
2. |
Loosen the screw (A) and then remove the disc (B).
|
3. |
Remove the spring(A, B, C).
|
4. |
Remove the shoe (A).
|
5. |
Disconnect the parking brake cable (A) from lining (B).
|
6. |
Remove the clip (A).
|
7. |
Remove the parking brake cable clip (A).
|
8. |
Remove the clip (A) and then remove the parking brake cable (B).
|
9. |
Remove the brake hose (A) and then loosen the cylinder bolt.
|
10. |
Loosen the hub mounting bolt and then remove the hub (A) from
the torsion beam (B).
|
11. |
Loosen the bolt & nut and then remove the rear shock absorber
(A) from the torsion beam axle (B).
|
12. |
Loosen the bolt and then remove the torsion beam axle (A) from
the body.
|
13. |
Install in the reverse order of removal.
|
Lubricants
Items
Specified lubricants
Quantity
Input shaft spline
CASMOLY L9508
0.2g
Clutch release cylinder assembly
Brake flu ...
Relay Box (Passenger Compartment) Removal
Passenger Compartment Junction Box
1.
Disconnect the negative(-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to th ...
SS-B Solenoid Valve(ON/OFF) Description
SS-B solenoid valve is attached to the valve body and is an on/off solenoid
valve that is used to change gears. SS-B Solenoid valve(ON/OFF) is installed
at valve body.
...