1. |
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
|
2. |
Turn the steering wheel so that the front wheels can face straight
ahead.
|
3. |
(Refer to “Air bag module / DAB” in RT group)
Remove the airbag module.
|
4. |
Disconnect the lock nut (A) & connector (B) and then remove the
steering wheel by using special service tools. (09561-11001)
|
5. |
Installation is the reverse of the removal.
|
Fluid Components Location
1. Injection hole(eyebolt)
2. Oil level plug
3. Oil drain plug
...
Components
1. Guide rod bolt
2. Bleed screw
3. Caliper carrier
4. Caliper body
5. Brake pad
6. Pad retainer
...
Transaxle Control Module (TCM) Inspection
TCM Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis
ground using the backside of TCM harness connector as TCM side c ...