1. |
Loosen the screw(6ea) and remove the lower cover (A) from the
steering wheel body.
|
2. |
Disconnect the heated steering wheel unit connector (A) and remove
the heated steering wheel unit (B) and wiring (C) and then loosen the
screw(2ea).
|
3. |
Remove the remote control assembly (A) from the steering wheel
body.
|
4. |
Installation is the reverse of the removal.
|
Inspection
1.
Check for DTCs.
•
If a DTC is ...
Disassembly
Engine removal is required for this procedure. (Refer to Engine and transaxle
assembly removal in this group)
1.
M/T : Remove the fly wheel.
2.
...
Operation Principle
•
In the ISG mode, if the power of an audio system turns
OFF by drawdown while “Auto ...