1. |
Remove the front wheel & tire.
|
2. |
Disconnect the stabilizer link (B) with the front strut assembly
(A) after loosening the nut.
|
3. |
Loosen the nut and then remove the tie-rod end (A) from the front
axle by using SST(09568-34000).
|
4. |
Loosen the nut and then remove the lower arm (A).
|
5. |
Loosen the bolt (A) and then disconnect the universal joint assembly
from the pinion of the steering gear box.
|
6. |
Remove the rubber hanger (A).
|
7. |
Loosening the roll rod (A) mounting bolts and nuts.
|
8. |
Loosen the bolts & nuts and then remove the front sub frame (A).
|
9. |
Remove steering gearbox (A) from the front sub frame by loosening
the mounting bolts.
|
10. |
Installation is the reverse of the removal.
|
Side Airbag (SAB) Module Description
The Side Airbags (SAB) are installed inside the front seat and protects
the driver and passenger from danger when side crash occurs. The SRSCM determines
deployment of side airbag by using Si ...
Specification
Accelerator
Position
Output Voltage (V)
APS1
APS2
C.T
0.7 ~ 0.8
0.275 ~ 0.475
W.O.T
3.8 ~ 4.4
1.75 ~ 2.35 ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Lift the vehicle.
3.
Rem ...