1. |
After spreading grease on the rack bar gear part (A), install
rack bar (B) in the direction of the arrow.
|
2. |
After spreading grease on the pinion gear part, install the pinion
assembly (A).
|
3. |
After spreading three bond (Loctite) on the top plug (A) thread,
install the top plug by using the spanner.
|
4. |
Install the dust packing & cap (A).
|
5. |
Install the support yoke (A).
|
6. |
Install the Yoke plug (A) and leaf spring (B).
|
7. |
After spreading three bond (Loctite) on the Yoke plug (A) thread,
install the Yoke plug.
|
8. |
Adjust Yoke with reference to the “How to adjust Yoke”.(Refer
to "Steering gear box(Adjustment)" in ST group)
|
9. |
After fixing the yoke plug, install the rock nut (A).
|
10. |
Install the tie-rod & tie-rod end assembly (A). (The left and
right same work)
|
11. |
Caulk (A) the rack bar and tie-rod assembly joints. (The left
and right same work)
|
12. |
After spreading sealant on the rack hosing and the bellow joints
(A), install the bellows (B) in the direction of the arrow.
|
TPMS Sensor Removal
Handle the sensor with care.
1.
Remove the tire. (Refer to "Tire Removal")
...
ISG OFF Switch: Description
The ISG OFF switch on the crash pad lower panel can be used to deactivate
the ISG function.
...
Sunroof Adjustment
How To Initialize
1.
Check that the glass has been installed.
A.
Finished height adjustment.
2.
...