Kia Rio: Front Impact Sensor (FIS) Description

The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the FIS is to provide an indication of a collision. The FIS sends acceleration data to the SRSCM.

SRS Control Module (SRSCM) Variant coding

After replacing the SRSCM with a new unit, the “Variant Coding” procedure must be performed.    1. ...

Front Impact Sensor (FIS) Components

...

See also:

Door locks
Operating door locks from outside the vehicle Turn the key toward the rear of the vehicle to unlock and toward the front of the vehicle to lock. If you lock/unlock the door with a key, all ...

Component Location Index
Engine Room 1. Receiver Drier 2. Condenser 3. Ambient Temperature Sensor 4. Compressor 5. Discharge Hose 6. Suction & Liquid Tube Assembly 7. Service ...

Hazard Lamp Switch Inspection
1. Operate the switch and check for continuity between terminals. ...