Kia Rio: Seat Belt Buckle Switch (BS) Removal
| 1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
| 2. |
Remove the front seat assembly.
(Refer to the Body group - "Front seat")
|
| 3. |
Loosen the seat belt buckle mounting bolt and remove the seat
belt buckle switch.
|
Seat Belt Buckle Switch (BS) Installation
Be sure to install the harness wires so they will not pinch or
interfere with other parts.
...
See also:
Operation
Evaporative System Monitoring
Evaporative And ORVR Emission Control System
This system consists of below items;
-
Fill vent valve
-
...
Wave Form
...
Wiper blades
Blade inspection
Commercial hot waxes applied by automatic car washes have been known to make
the windshield difficult to clean.
Contamination of either the windshield or the wiper blades with f ...
Copyright © www.kirmanual.com 2014-2024