Kia Rio: Passenger Airbag (PAB) Module Removal
| 1. |
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
|
| 2. |
Remove the glove box housing.
(Refer to the Body group - "Crash pad")
|
| 3. |
Disconnect the passenger airbag connector (B) and remove the PAB
mounting bolt (A).
|
| 4. |
Remove the crash pad.
(Refer to the Body group - "Crash pad")
|
| 5. |
Remove the heater duct from the crash pad.
|
| 6. |
Remove the mounting bolts from the crash pad. And then remove
the passenger airbag.
|
Passenger Airbag (PAB) ModuleInstallation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable from battery and wait for
at least thirty seconds bef ...
See also:
Yaw-rate and G Sensor Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the front seat (LH) assembly.
(Refer to the Bo ...
Front Driveshaft Component
1. Driveshaft (LH)
2. Circlip
3. Circlip
4. Driveshaft (RH)
...
Specification
Smart Key Unit
Items
Specification
Rated voltage
DC 12V
Operating voltage
DC 9 ~ 16V
Operating temperature
-30°C ~ 75°C (- ...
Copyright © www.kirmanual.com 2014-2024