Kia Rio: Curtain Airbag (CAB) Module Removal
| 1. |
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
|
| 2. |
Remove the roof trim.
(Refer to the Body group - "Interior")
|
| 3. |
Disconnect the curtain airbag harness connector (A).
|
| 4. |
After loosening the mounting bolts remove the curtain airbag.
|
Curtain Airbag (CAB) Module Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...
See also:
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Release the residual pressure in fuel line (Refer to the ...
Component Location (1)
1. Interior antenna 1
2. Interior antenna 2
3. Door outside handle
4. Buzzer
5. Smart key unit
6. SSB (Start Stop Button)
...
Circuit Diagram
...
Copyright © www.kirmanual.com 2014-2024