1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least thirty
seconds.
|
3. |
Install the seat belt pretensioner with bolts (B, C).
|
4. |
Connect the seat belt pretensioner connector (A).
|
5. |
Install the upper anchor bolt.
|
6. |
Install the center pillar trim.
(Refer to the Body group - "Interior trim")
|
7. |
Install the door scuff trim.
(Refer to the Body group - "Interior trim")
|
8. |
Insert the seat belt to the anchor pretensioner.
|
9. |
Reconnect the battery negative cable.
|
10. |
After installing the seat belt pretensioner, confirm proper system
operation:
|
Basic Troubleshooting
Basic Troubleshooting Guide
Customer Problem Analysis Sheet
Basic Inspection Procedure
Measuring Condition of Electronic Parts' Resistance
The measured resistance at hig ...
Limp Home Function
1.
Limp Home By Tester
If the ECM detects the fault of the Immobilizer or transponder,
the ECM will allow limp home function of the immobilizer. Limp home
is o ...
Interior features
Cigarette lighter (if equipped)
For the cigarette lighter to work, the ignition switch must be in the ACC or
ON position.
To use the cigarette lighter, push it all the way into its socket. When ...