1. |
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
|
2. |
Remove the seat belt after pushing the lock pin (A).
|
3. |
Remove the door scuff trim.
(Refer to the Body group - "Interior trim")
|
4. |
Remove the center pillar trim.
(Refer to the Body group - "Interior trim")
|
5. |
Disconnect the anchor pretensioner connector (A).
|
6. |
Loosen the anchor pretensioner mounting bolt (B) and remove the
anchor pretensioner.
|
Spark Plug: Removal
1.
Remove the ignition coil.
(Refer to Ignition System - "Ignition Coil")
2.
Using a spark plug wrench, remove the spark plu ...
License Lamp Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the license lamp lens by pushing the clip (A).
3.
...
Operation
Function Of Safety Power Window
When all door (Front, Rear) power window auto-up switch is operated, safety
function is activated.
1.
Safety function condition
...