Kia Rio: Installation
| 1. |
Installation is the reverse of removal.
|
| 2. |
After installing, bleed the brake system.
(Refer to Brake system bleeding)
|
| 3. |
Adjust the brake pedal height and free play.
(Refer to Brake pedal height and free play adjustment)
|
Inspection
1.
Inspect the check valve in the vacuum hose.
Do not remove the check va ...
Master Cylinder
...
See also:
Specification
Item
Resistance (Ω)
Driver Airbag (DAB)
1.7 ~ 2.3
Passenger Airbag (PAB)
1.7 ~ 2.3
Side Airbag (SAB)
2.0 ~ 2.4
...
Input Speed Sensor Installation
1.
Installation is the reverse of removal.
After replacement or reinstallation procedure of ...
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications
Direct control VFS[35R/C]
▷ Control type : Normal low type
Control Pressure kpa (kgf/cm², psi)
500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42)
Current value(mA ...
Copyright © www.kirmanual.com 2014-2024