1. |
Turn ignition switch OFF, and disconnect the negative (-) battery
cable.
|
2. |
Remove the battery and ECM.
(Refer to the Engine Electrical group - "Battery")
|
3. |
Disconnect the brake fluid level switch connector (A) from the
reservoir.
|
4. |
Remove the brake fluid from the master cylinder reservoir with
a syringe.
|
5. |
Disconnect the brake tube from the master cylinder by loosening
the tube flare nut (A).
|
6. |
Remove the clutch hose. [MT Only]
|
7. |
Remove the master cylinder (B) from the brake booster after loosening
the mounting nuts (C).
|
Trunk Lid Adjustment
1.
After loosening the trunk lid hinge (A) mounting bolt, adjust
the trunk lid by moving it up or down, or right or left.
2.
Adjust the tru ...
Hands free switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver airbag module.
(Refer to the RT group - "DAB and Clock spring ...
Spark Plug: Removal
1.
Remove the ignition coil.
(Refer to Ignition System - "Ignition Coil")
2.
Using a spark plug wrench, remove the spark plu ...