Kia Rio: Brake Line

Installation

1. Installation is the reverse of removal. 2. After installation, bleed the brake system. (Refer to Brake system bleeding) ...

Components

...

See also:

Cowl Top Cover Replacement
1. Remove the wiper arm cover (B). 2. After loosening the mounting nuts, then remove the wiper arm (A). Tightening to ...

Seat Heater Switch Installation
1. Install the seat heater switch. 2. Install the console assembly. 3. Connect the battery (-) terminal. ...

Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake door by signal from control unit. Pressing the intake selection switch will shift between recirculation and fresh ai ...