1. |
Turn ignition switch OFF.
|
2. |
Remove the crash pad lower panel.
(Refer to the Body group - "Crash pad")
|
3. |
Remove the shower duct (A).
|
4. |
Disconnect the stop lamp switch connector (A).
|
5. |
Remove the shift lock cable (B) after removing the snap pin and
the clip.
|
6. |
Remove the BCM.
(Refer to the Body Electrical group - "BCM")
|
7. |
Remove the mounting bracket bolts (A).
|
8. |
Remove the snap pin (A) and clevis pin (B).
|
9. |
Remove the brake pedal member assembly mounting nuts (A) and then
remove the brake pedal assembly.
|
Side Impact Sensor (SIS) Components
...
Installation
•
Install the component with the specified torques.
•
...
Components
1. Driver Airbag (DAB)
2. Steering Wheel
3. Clock Spring
4. Seat Belt Pretensioner (BPT)
5. Pressure Side Impact Sensor (P-SIS)
6. Side Impact Sensor (SIS)
7. Side Airbag ...