Kia Rio: Removal
| 1. |
Remove the front wheel & tire.
|
| 2. |
Loosen the hose eyebolt (C) and caliper mounting bolts (B), then
remove the front caliper assembly (A).
|
| 3. |
Remove the front brake disc by loosening the screws (A).
|
Components
1. Guide rod bolt
2. Bleed screw
3. Caliper body
4. Caliper carrier
5. Inner pad shim
6. Brake pad
7. Pad retainer
...
Replacement
Front Brake Pads
1.
Remove the brake hose mounting bracket bolt (A).
Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ...
See also:
Reassembly
•
Thoroughly clean all parts to be assembled.
•
...
Component Location
1. Horn switch
2. Horn relay (Egine Room Relay)
3. Horn
4. Clock spring
...
Antenna Coil Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
...
Copyright © www.kirmanual.com 2014-2024