Kia Rio: Removal
| 1. |
Remove the rear wheel & tire.
|
| 2. |
Remove the parking brake cable (A), after removing the clip (B).
|
| 3. |
Remove the hose eyebolt (B).
|
| 4. |
Loosen the caliper mounting bolts (C), then remove the rear caliper
assembly (A).
|
| 5. |
Remove the rear brake disc by loosening the screws (A).
|
Components
1. Guide rod bolt
2. Bleed screw
3. Caliper carrier
4. Caliper body
5. Brake pad
6. Pad retainer
...
Replacement
Rear Brake Pads
1.
Loosen the guide rod bolt (B) and then remove the rear caliper
body (A).
Tightening torque:
21.6 ~ 31 ...
See also:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV termi ...
Components
[Front]
(5 Door, 4 Door)
1. Front seat belt
2. Height adjust
3. Front seat belt anchor pretensioner (NA : North america)
[Rear]
...
Power Mosfet (FATC) Inspection
1.
Turn the ignition switch ON.
2.
Manually operate the control switch and measure the voltage of
blower motor.
3.
...
Copyright © www.kirmanual.com 2014-2024