Kia Rio: ESC Control Module Installation
| 1. |
Installation is the reverse of removal.
|
| 2. |
Tighten the HECU mounting bolts and nuts to the specified torque.
|
| 3. |
After installation, bleed the brake system.
(Refer to ABS bleeding)
|
ESC Control Module Removal
1.
Turn ignition switch OFF.
2.
Pull up the lock of the HECU connector (A), and then disconnect
the connector.
...
Front Wheel Speed Sensor Components
1. Front wheel speed sensor connector
2. Front wheel speed sensor
...
See also:
Specifications
Items
Specification
Hood
Type
Rear hinged, front opening type
Front Door
Construction
Front hinged, full door construction
...
Brake Switch Inspection
1.
Connect a circuit tester to the connector of stop lamp switch,
and check whether or not there is continuity when the plunger of the
stop lamp switch is pushed in an ...
Front Hub / Knuckle Components
1. Snap ring
2. Bearing
3. Axle assembly
4. Brake disc dust cover
5. Wheel hub assembly
6. Wheel brake disc
7. Brake disc fixing screw
...
Copyright © www.kirmanual.com 2014-2024