Kia Rio: Front Wheel Speed Sensor Inspection
| 1. |
Measure the output voltage between the terminal of the wheel speed
sensor and the body ground.
|
| 2. |
Compare the change of the output voltage of the wheel speed sensor
to the normal change of the output voltage as shown below.
|
Front Wheel Speed Sensor Removal
1.
Remove the front wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Rear Wheel Speed Sensor Components
1. Rear wheel speed sensor connector
2. Rear wheel speed sensor
...
See also:
Specifications
Battery [Non-ISG type]
Item
Specification
Model type
CMF45L-BCI
Capacity [20HR/5HR] (AH)
45/36
Cold Cranking Amperage (A)
...
Description
Continuous Variable Valve Timing (CVVT) system advances or retards the
valve timing of the intake and exhaust valve in accordance with the ECM control
signal which is calculated by the engine ...
Fuel filler lid
Opening the fuel filler lid
The fuel filler lid must be opened from inside the vehicle by pulling up the
fuel filler lid opener.
If the fuel filler lid does not open because ice has formed aroun ...
Copyright © www.kirmanual.com 2014-2024