1. |
Remove the rear wheel and tire.
|
2. |
Remove the rear wheel speed sensor mounting bolt (A).
|
3. |
Remove the rear seat back.
(Refer to the Body group - "Seat")
|
4. |
Remove the rear wheel housing trim.
(Refer to the Body group – "Interior trim")
|
5. |
Disconnect the rear wheel speed sensor connector.
|
6. |
Installation is the reverse of removal.
|
Compressor Installation
1.
Make sure of the length of compressor mounting bolts, and then
tighten it with the specified tightening order.
Tightening torque :
...
ESC Control Module Removal
1.
Turn ignition switch OFF.
2.
Pull up the lock of the HECU connector (A), and then disconnect
the connector.
...
Inside rearview mirror
Adjust the rearview mirror so that the center view through the rear window is
seen. Make this adjustment before you start driving.
Do not place objects in the rear seat which would interfere with y ...