Kia Rio: Rear Wheel Speed Sensor Inspection
| 1. |
Measure the output voltage between the terminal of the wheel speed
sensor and the body ground.
|
| 2. |
Compare the change of the output voltage of the wheel speed sensor
to the normal change of the output voltage as shown below.
|
Rear Wheel Speed Sensor Removal
1.
Remove the rear wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Yaw-rate and G Sensor Description
When the vehicle is turning with respect to a vertical axis the yaw rate
sensor detects the yaw rate electroniclly by the vibration change of plate fork
inside the yaw rate sensor.
If yaw ...
See also:
Function
Function
Description
Front Washer & Wiper
-
Settings: IGN2 On,
-
Acti ...
Power Door Mirror Actuator Inspection
1.
Remove the front door quadrant delta cover.
(Refer to the BD group - "Front door")
2.
Disconnect the power door mirror conn ...
Front Fog Lamps Inspection
Multifunction Switch(Lighting)
1.
Disconnect the negative(-) battery terminal.
2.
Remove the lighting switch of the multi-function switch. ...
Copyright © www.kirmanual.com 2014-2024