1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Remove the crash pad lower panel.
(Refer to the Body group - "Crash pad")
|
3. |
Remove the crash pad side switch assembly (A).
|
4. |
Check the continuity between the switch terminals as the ESC OFF
switch is engaged.
|
Output Speed Sensor Installation
1.
Installation is the reverse of removal.
After replacement or reinstallation procedure of ...
Power Window Motor Circuit Diagram
...
Component Location
1. Auto light sensor
2. Head lamps
3. Lighting switch (Auto)
4. Tail lamps
5. BCM (Body Control Module)
...