1. |
Basically, all measurements in this manual are taken with a tracking
gauge.
|
2. |
When a measuring tape is used, check to be sure there is no elongation,
twisting or bending.
|
3. |
For measuring dimensions, both projected dimension and actual-measurement
dimension are used in this manual.
|
ISG OFF Switch: Inspection
1.
Remove the crash pad side switch assembly (A) from the switch
panel on the crach pad of the driver's side.
2.
Remove the ISG ...
Transaxle Oil Temperature Sensor Circuit Diagram
...
Inspection
Front Brake Disc Thickness Check
1.
Check the brake pads for wear and fade.
2.
Check the brake disc for damage and cracks.
...