Kia Rio: 4Door Side Body
|
|
|
|
| Front side member tooling hole (Ø12) |
Fender apron upper member tooling hole (Ø7) |
Front door upper hinge mounting hole (Ø13) |
|
|
|
|
| Front door lower hinge mounting hole (Ø13) |
Delta glass mounting hole (5.5X10) |
Side outer panel notch |
|
|
|
|
| Side outer panel notch |
Front door switch mounting hole (Ø9) |
Rear door upper hinge mounting hole (Ø13) |
|
|
|
|
| Rear door lower hinge mounting hole (Ø13) |
Side outer panel notch |
Side outer panel notch |
|
|
|
|
| Side outer panel notch |
Rear door switch mounting hole (Ø9) |
Quarter pillar moulding mounting hole (Ø7) |
|
|
|
|
| Rear bumper mounting hole (10X8.5) |
Rear combination lamp mounting hole (Ø6) |
4Door Front Body C
Engine mounting hole (Ø11)
Transaxle mounting hole (Ø12)
Engine mounting hole (Ø12)
...
4Door Interior
Front pillar trim mounting hole (Ø8.5)
Curtain airbag mounting hole (Ø6.6)
Cowl crossbar mounti ...
See also:
Components
1. Transaxle mounting bracket
2. Roll rod bracket
3. Engine mounting bracket
4. Engine mounting support bracket
...
Installation
1.
Installation is the reverse of removal.
If the oil seal on the transaxle case side is da ...
Ambient Temperature Sensor Description
The ambient temperature sensor is located at the front of the condenser
and detects ambient air temperature. It is a negative type thermistor; resistance
will increase with lower temperature, ...
Copyright © www.kirmanual.com 2014-2024