Kia Rio: Fender Replacement

•	When removing and installing the fender, an assistant is necessary.

•	Be careful not to damage the fender and body.

•	When removing the clips, use a clip remover.

1.	Remove the front bumper cover. (Refer to the BD group – “Front bumper”)

2.	Remove the head lamps. (Refer to the BE group – “Head Lamps”)

3.	Using a screwdriver or remover, remove the front pillar trim (A).

4.	Disconnect the tweeter speaker connector (A).

5.

Loosen the delta glass mounting nuts.

Tightening torque :

3.9 ~ 4.4 N.m (0.4 ~ 0.45 kgf.m, 2.9 ~ 3.3 lb-ft)

6.	Remove the delta glass (A).

7.	Loosen the wheel guard (A) mounting screws.

8.	After loosening the mounting screws, then remove the front bumper side mounting bracket (A).

9.	After loosening the mounting bolts, then remove the fender assembly (A).

10.	Installation is the reverse of removal.

Exterior

...

Hood Replacement

Hood Assembly Replacement • When removing and installing the hood, an assistant is ...

See also:

5Door Side Body C
Side outer panel notch Side outer panel notch Side outer panel notch ...

Owner maintenance
The following lists are vehicle checks and inspections that should be performed by the owner or an authorized Kia dealer at the frequencies indicated to help ensure safe, dependable operation of y ...

Voice recognition
Using Voice Recognition Starting Voice Recognition Shortly press the key on the steering wheel. Say a command If prompt feedback is in [ON], then the system will say “Please say a comma ...

Categories

Copyright © www.kirmanual.com 2014-2024