1. |
After loosening the hinge (A) mounting bolt, adjust the hood (B)
by moving it up or down, or right or left.
|
2. |
Adjust the hood height by turning the hood over slam bumpers (C).
|
3. |
After loosening the hood latch (D) mounting bolts and nuts, adjust
the latch by moving it up or down, or right or left.
|
Rear Coil Spring Replacement
1.
Remove the rear wheel & tire.
(Both RH side and LH side)
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb ...
Transaxle Oil Temperature Sensor Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor ...
Muffler: Components
1. Front muffler
2. Catalytic converter & Center muffler assembly
3. Main muffler
4. Gasket
5. Hanger
...