|
1. |
Remove the glass (A) by lifting it up.
|
2. |
Installation is the reverse of removal.
|
|
1. |
Remove the roof trim.
(Refer to the BD group - "Roof Trim")
|
2. |
After loosening the mounting screws, then remove the motor assembly
(A).
|
3. |
Installation is the reverse of removal.
|
1. |
Open the glass fully.
|
2. |
After loosening the mounting screws, then remove the deflector
(A).
|
3. |
Installation is the reverse of removal.
|
1. |
Remove the follows parts :
|
2. |
After loosening the mounting bolts, then remove the assist handle
bracket (A).
|
3. |
After loosening the mounting bolts, then remove the sunroof center
bracket (A).
|
4. |
Disconnect the drain tubes (B).
|
5. |
After loosening the mounding bolts and nuts, remove the sunroof
assembly (A).
|
6. |
Installation is the reverse of removal.
|
1. |
Remove the sunroof assembly.
|
2. |
Remove the sunshade stopper (B).
|
3. |
Remove the sunshade assembly (A).
|
4. |
Installation is the reverse of removal.
|
1. |
Remove the sunroof assembly.
|
2. |
Remove a drip link assembly (A) after lowering a guide thoroughly
by pushing a slide to rear.
|
3. |
Remove the guide (A) and drip link (B).
|
4. |
Remove the drip link stopper (B).
|
5. |
Remove the drip link assembly (A).
|
6. |
Installation is the reverse of removal.
|
Multimedia Jack Removal
1.
Using a screwdriver or remover, remove the multimidia jack assembly.
...
Radiator: Description
[Air conditioning type]
The cooling fan operates in 2 stages (HIGH/LOW). The engine control module
(ECM) controls the cooling fan according to the coolant temperature, vehicle
speed and A ...
Manual climate control system
1. Fan speed control knob
2. Mode selection knob
3. Temperature control knob
4. Air conditioning button (if equipped)
5. Rear window defroster button
6. Air intake control button
Heating and a ...