[M/T] |
|
1. |
Using a screwdriver or remover, remove the gear boots (A).
|
2. |
Using a screwdriver or remover, remove the console upper cover
(A).
|
3. |
Using a screwdriver or remover, remove the parking brake cover
(A).
|
4. |
Remove the floor console pad (A).
|
5. |
After loosening the mounting bolts and clips, then remove the
floor console assembly (A).
|
6. |
Installation is the reverse of removal.
|
[A/T] |
|
1. |
Using a screwdirver or remover, remove the gear boots (B) and
gear knob (A).
|
2. |
Using a screwdriver or remover, remove the console upper cover
(A).
|
3. |
Disconnect the connectors (A).
|
4. |
Using a screwdriver or remover, remove the parking brake cover
(A).
|
5. |
Remove the floor console pad (A).
|
6. |
After loosening the mounting bolts, screws, clips, then remove
the floor console assembly (A).
|
7. |
Installation is the reverse of removal.
|
Removal
1.
Turn ignition switch OFF, and disconnect the negative (-) battery
cable.
2.
Remove the battery and ECM.
(Refer to the Engine Ele ...
Manual Transaxle Installation
When replacing a clutch housing or transaxle assembly, the wiring
bracket should be installed in accordance with the clu ...
Circuit Diagram
(M/T)
(A/T)
...