1. |
After loosening the mounting bolt, then remove the rear seat cushion
(A).
|
2. |
Disconnect the rear seat buckle connector (B).
|
3. |
After loosening the mounting bolt, then remove the center rear
seat belt lower anchor (A).
|
4. |
After loosening the mounting bolts, then remove the rear seat
back (A).
|
5. |
Installation is the reverse of removal.
|
[5 Door] |
|
1. |
Remove the following items first :
|
2. |
Push the lock pin (B), remove the headrest (A).
|
3. |
Remove the rear latch knob (A) after turning in the counter clock-wise
direction.
|
4. |
Remove the rear back knob bush (B).
|
5. |
Using a screwdriver or remover, remove the webbing guide (A).
|
6. |
After loosening the mounting screw, then remove the rear seat
back latch cover (A).
|
7. |
Remove the rear seat back lower mounting protector (A).
|
8. |
Zip off the rear seat back cover (A), and then full it up.
|
9. |
Pull out the headrest guides (A) while pinching the end of the
guides, and remove them.
|
10. |
Remove the rear seat back cover (A) from the rear seat back frame
(B).
|
11. |
After removing the hog-ring clips (B) on the rear of seat back
and remove the rear seat back cover (A).
|
12. |
Installation is the reverse of removal.
|
[4 Door] |
|
1. |
Remove the rear seat back assembly [LH].
|
2. |
Push the lock pin (B), remove the headrest (A).
|
3. |
After loosening the mounting screw, then remove the rear seat
back webbing guide (A).
|
4. |
Remove the rear latch knob (A) after turning in the counter clock-wise
direction.
|
5. |
Remove the rear seat back lower mounting protector (A).
|
6. |
Zip off the rear seat back cover (A), and then full it up.
|
7. |
Remove the hog-ring clips (A).
|
8. |
Pull out the headrest guides (A) while pinching the end of the
guides, and remove them.
|
9. |
Remove the rear seat back cover (A) from the rear seat back frame
(B).
|
10. |
After removing the hog-ring clips (B) on the rear of seat back
and remove the rear seat back cover (A).
|
11. |
Installation is the reverse of removal.
|
|
1. |
Remove the following items first :
|
2. |
After loosening the mounting bolts, then remove the rear seat
latch assembly (A).
[5 Door]
[4 Door]
|
3. |
Installation is the reverse of removal.
|
[5 Door] |
|
1. |
Remove the following items first :
|
2. |
Push the lock pin (B), remove the headrest (A).
|
3. |
Remove the rear latch knob (A) after turning in the counter clock-wise
direction.
|
4. |
Remove the rear back knob bush (B).
|
5. |
After loosening the mounting screw, then remove the rear seat
back latch cover (A).
|
6. |
Remove the rear seat back lower mounting protector (A).
|
7. |
Zip off the rear seat back cover (A), and then full it up.
|
8. |
Pull out the headrest guides (A) while pinching the end of the
guides, and remove them.
|
9. |
Remove the rear seat back cover (A) from the rear seat back frame
(B).
|
10. |
After removing the hog-ring clips (B) on the rear of seat back
and remove the rear seat back cover (A).
|
11. |
Installation is the reverse of removal.
|
[4 Door] |
|
1. |
Remove the rear seat back assembly [RH].
|
2. |
Push the lock pin (B), remove the headrest (A).
|
3. |
After loosening the mounting screw, then remove the rear seat
back webbing guide (A).
|
4. |
Remove the rear latch knob (A) after turning in the counter clock-wise
direction.
|
5. |
Remove the rear seat back lower mounting protector (A).
|
6. |
Zip off the rear seat back cover (A), and then full it up.
|
7. |
Remove the hog-ring clips (A).
|
8. |
Pull out the headrest guides (A) while pinching the end of the
guides, and remove them.
|
9. |
Remove the rear seat back cover (A) from the rear seat back frame
(B).
|
10. |
After removing the hog-ring clips (B) on the rear of seat back
and remove the rear seat back cover (A).
|
11. |
Installation is the reverse of removal.
|
|
1. |
Remove the following items first :
|
2. |
After loosening the mounting bolts, then remove the rear seat
latch assembly (A).
[5 Door]
[4 Door]
|
3. |
Installation is the reverse of removal.
|
|
1. |
Remove the following items first :
|
2. |
Remove the hog-ring clips (A).
|
3. |
After removing the hog-ring clips (B) on the rear of seat cushion
and remove the rear seat cushion cover (A).
|
4. |
Installation is the reverse of removal.
|
High Pressure Fuel Pump Removal
In case of removing the high pressure fuel pump, high pressure
fuel pipe, delivery pipe, and injector, there may be inju ...
Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery ...
Inspection
Clutch Pedal Inspection
1.
Measure the clutch pedal height (from the face of the pedal pad
to the floorboard) and the clutch pedal clevis pin play (measured at
the ...