|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Using a screwdriver or trim remover, remove the center fascia
panel (A).
|
3. |
Disconnect the start/stop button connector (A) and hazard switch
connector (B).
|
4. |
After loosening the mounting screws, then remove the audio assembly
(A).
|
5. |
Disconnect the audio connector and cable (A).
|
System settings
Press the key
Select [System]
Select menu through
TUNE knob
Memory Information
Displays currently used memory and total system memory.
Select [Memory Information]
OK
The ...
Inspection
1.
Inspect diaphragm spring wear which is in contact with a concentric
slave cylinder bearing.
2.
Check the clutch cover and disc surface f ...
Back-up Lamp Switch Replacement
1.
Disconnect the back up lamp switch connector (A).
2.
Remove the back up lamp switch (A).
3.
...