Kia Rio: Audio Remote Control Inspection

1.

Check the audio remote control switch (A) for resistance between No.5 and No.7 terminals in each switch position.

Switch	Connector terminal	Resistance (± 5%)
SEEK UP	6-7 (LH)	430 Ω
SEEK DOWN	6-7 (LH)	1.11 kΩ
MODE	6-7 (LH)	2.11 kΩ
MUTE	6-7 (LH)	3.11 kΩ
VOLUME UP	6-7 (LH)	4.61 kΩ
VOLUME DOWN	6-7 (LH)	6.81 kΩ
CANCEL	3-4 (RH)	180 Ω
SET -	3-4 (RH)	330 Ω
RES +	3-4 (RH)	550 Ω
ON/ OFF	3-4 (RH)	880 Ω
SLD	3-4 (RH)	1.44 kΩ
VOICE	3-4 (RH)	10.71 kΩ

Switch	Connector terminal	Resistance (± 5%)
END	5-6 (Lower LH)	18.91 kΩ
SEND	5-6 (Lower LH)	40.91 kΩ
TRIP	5-6 (Lower RH)	2.54 kΩ
RESET	5-6 (Lower RH)	5.54 kΩ

Audio Remote Control Schematic Diagrams

Circuit Diagram (1) Circuit Diagram (2) ...

Audio Remote Control Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the driver airbag module. (Refer to the RT group - "DAB and Clock spring ...

See also:

Multimedia Jack Description
The multimedia jack on the console upper cover is for customers who like to listen to external portable music players like the MP3, iPod and etc., through the vehicle's sound system when ...

Operation Condition for the ISG function
1. Auto stop or Auto start condition (If all of the below condition are satisfied) Items State Remark Driving conditions ISG OFF Switch ...

Blower Unit Replacement
1. Remove the heater & blower unit. (Refer to HA group - "Heater Unit") 2. Separate the blower unit from the heater unit a ...

Categories

Copyright © www.kirmanual.com 2014-2024